4/2005 page 10 www . delevan . com e-mail: apisales@delevan . com 270 quaker rd., east aurora ny 14052 ? phone 716-652-3600 ? fax 716-652-4814 rf inductors srf minimum (mhz) current rating maximum (ma) dc resistance maximum (ohms) dash number* inductance (nh) ?0% inductance & q test frequency (mhz) q minimum physical parameters inches millimeters a 0.050 max. 1.27 max. b 0.030 max. 0.76 max. c 0.024 max. 0.61 max. d 0.020 (ref. only) 0.51 (ref. only) e 0.009 (ref. only) 0.23 (ref. only) f 0.022 (ref. only) 0.56 (ref. only) g 0.026 0.66 h 0.019 0.50 i 0.018 0.46 operating temperature range ?0? to +125? inductance and q tested on hp4291a using hp16193a test ?ture, or equivalent packaging tape & reel (8mm): 7" reel, 4000 pieces max. 1360 1040 1040 960 790 640 840 840 840 700 640 800 760 760 680 680 680 480 680 480 640 640 440 560 560 420 480 420 400 400 400 400 400 400 320 200 320 100 150 100 100 100 0.045 0.070 0.070 0.070 0.070 0.120 0.066 0.066 0.066 0.091 0.130 0.083 0.083 0.083 0.083 0.104 0.104 0.200 0.104 0.195 0.120 0.120 0.210 0.172 0.220 0.230 0.202 0.250 0.300 0.300 0.300 0.300 0.350 0.350 0.440 0.550 0.440 0.810 0.830 0.820 0.970 1.120 12,700 11,300 11,100 10,800 10,500 10,400 7000 6800 5800 6000 4700 4800 4800 4800 4800 4800 4400 4100 4160 3900 3680 3600 3450 3280 3100 3100 3040 3000 2800 2720 2700 2480 2350 2350 2320 2100 2240 2030 2100 1750 1700 1620 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 16 16 16 19 15 16 19 19 19 18 15 20 20 20 20 22 22 18 22 21 24 24 24 24 24 24 24 25 25 24 25 24 25 24 24 25 24 25 20 25 22 22 1.0 1.9 2.0 2.2 2.4 2.7 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 8.7 9.0 10 11 12 13 15 16 18 19 20 22 23 24 27 30 33 36 39 40 43 47 51 56 68 series 0402 ceramic core -1n0k -1n9k -2n0k -2n2k -2n4k -2n7k -3n3k -3n6k -3n9k -4n3k -4n7k -5n1k -5n6k -6n2k -6n8k -7n5k -8n2k -8n7k -9n0k -10nk -11nk -12nk -13nk -15nk -16nk -18nk -19nk -20nk -22nk -23nk -24nk -27nk -30nk -33nk -36nk -39nk -40nk -43nk -47nk -51nk -56nk -68nk optional tolerances j = 5% g=2% (1.0nh min. tolerance is ?0%) (1.9nh - 2.7nh min. tolerance is ?%) *complete part # must include series # plus the dash # for further surface ?ish information, refer to technical section of this catalog. land pattern dimensions 0402r 0402 open construction wirewound surface mount inductors series
|
